<progress id="rzhbt"></progress>
    <address id="rzhbt"></address>

    <p id="rzhbt"></p>

    <video id="rzhbt"><progress id="rzhbt"><progress id="rzhbt"></progress></progress></video>

      <noframes id="rzhbt"><span id="rzhbt"><progress id="rzhbt"></progress></span>
      <noframes id="rzhbt">

      <b id="rzhbt"></b>
      當前位置:首頁>>新聞中心>>常見問題

      PC(聚碳酸酯)EXL1414H/沙伯基礎(SABIC)物性表參數

      責任編輯:admin發表時間:2020-06-12 05:32:45

      SABIC(沙伯基礎創新塑料)LEXAN PC EXL1414H是不透明pc加硅氧烷共聚物,加工性能優異,介質流動,低溫韌性好,增強的水解穩定性,只有黑色可供選擇。
      PC(聚碳酸酯)EXL1414H/沙伯基礎(SABIC)物性表參數PDF文檔下載
      PC EXL1414H
      以下是PC(聚碳酸酯)EXL1414H/沙伯基礎(SABIC)物性表參數
      PROPERTIES   TYPICAL VALUES UNITS TEST METHODS
      MECHANICAL        
      Tensile Stress, yld, Type I, 50 mm/min   56 MPa ASTM D 638
      Tensile Stress, brk, Type I, 50 mm/min   50 MPa ASTM D 638
      Tensile Strain, yld, Type I, 50 mm/min   6 % ASTM D 638
      Tensile Strain, brk, Type I, 50 mm/min   98 % ASTM D 638
      Tensile Modulus, 50 mm/min   2020 MPa ASTM D 638
      Flexural Stress, yld, 1.3 mm/min, 50 mm span   92 MPa ASTM D 790
      Flexural Modulus, 1.3 mm/min, 50 mm span   2230 MPa ASTM D 790
      Tensile Stress, yield, 50 mm/min   57 MPa ISO 527
      Tensile Stress, break, 50 mm/min   60 MPa ISO 527
      Tensile Strain, yield, 50 mm/min   6 % ISO 527
      Tensile Strain, break, 50 mm/min   120 % ISO 527
      Tensile Modulus, 1 mm/min   2150 MPa ISO 527
      Flexural Stress, yield, 2 mm/min   85 MPa ISO 178
      Flexural Modulus, 2 mm/min   2250 MPa ISO 178
      IMPACT        
      Izod Impact, notched, 23°C   865 J/m ASTM D 256
      Izod Impact, notched, -30°C   774 J/m ASTM D 256
      Instrumented Impact Total Energy, 23°C   70 J ASTM D 3763
      Instrumented Impact Total Energy, -30°C   77 J ASTM D 3763
      Izod Impact, unnotched 80*10*3 +23°C   NB kJ/m² ISO 180/1U
      Izod Impact, unnotched 80*10*3 -30°C   NB kJ/m² ISO 180/1U
      Izod Impact, notched 80*10*3 +23°C   70 kJ/m² ISO 180/1A
      Izod Impact, notched 80*10*3 -30°C   60 kJ/m² ISO 180/1A
      Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm   70 kJ/m² ISO 179/1eA
      Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm   65 kJ/m² ISO 179/1eA
      Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm   NB kJ/m² ISO 179/1eU
      Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm   NB kJ/m² ISO 179/1eU
      THERMAL        
      Vicat Softening Temp, Rate B/50   145 °C ASTM D 1525
      HDT, 0.45 MPa, 3.2 mm, unannealed   139 °C ASTM D 648
      HDT, 1.82 MPa, 3.2mm, unannealed   124 °C ASTM D 648
      CTE, -40°C to 40°C, flow   7.E-05 1/°C ASTM E 831
      CTE, -40°C to 40°C, xflow   7.E-05 1/°C ASTM E 831
      CTE, 23°C to 80°C, flow   7.2E-05 1/°C ISO 11359-2
      CTE, 23°C to 80°C, xflow   7.2E-05 1/°C ISO 11359-2
      Ball Pressure Test, 125°C +/- 2°C   PASSES - IEC 60695-10-2
      Vicat Softening Temp, Rate B/50   145 °C ISO 306
      Vicat Softening Temp, Rate B/120   146 °C ISO 306
      HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm   140 °C ISO 75/Be
      HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm   128 °C ISO 75/Ae
      PHYSICAL        
      Specific Gravity   1.18 - ASTM D 792
      Mold Shrinkage, flow, 3.2 mm   0.4-0.8 % SABIC method
      Melt Flow Rate, 300°C/1.2 kgf   10 g/10 min ASTM D 1238
      Density   1.19 g/cm³ ISO 1183
      Water Absorption, (23°C/saturated)   0.35 % ISO 62-1
      Moisture Absorption (23°C / 50% RH)   0.15 % ISO 62
      Melt Volume Rate, MVR at 300°C/1.2 kg   9 cm³/10 min ISO 1133
      Injection Molding        
      Drying Temperature   120 °C  
      Drying Time   3-4 hrs  
      Drying Time (Cumulative)   48 hrs  
      Maximum Moisture Content   0.02 %  
      Melt Temperature   295-315 °C  
      Nozzle Temperature   290-310 °C  
      Front - Zone 3 Temperature   295-315 °C  
      Middle - Zone 2 Temperature   280-305 °C  
      Rear - Zone 1 Temperature   270-295 °C  
      Mold Temperature   70-95 °C  
      Back Pressure   0.3-0.7 MPa  
      Screw Speed   40-70 rpm  
      Shot to Cylinder Size   40-60 %  
      Vent Depth   0.025-0.076 mm

      溫馨提示:
      本物性表參數提供者不承擔任何法律責任,建議在選擇材料前,就數據值與塑膠材料廠商進行驗證。版權歸原作者所有,如有侵權請立即與我們聯系.

      為及時發現和糾正網站存在的信息內容等方面問題,在使用網站時及時反饋網站問題,從而幫助推進網站信息內容建設工作,提高網站信息互動交流。